按回车(ENTER)搜索
网页 牌价 百科
首页 搜索结果 详情页
更新于2020/1/4

环氧/聚酯混合型粉末涂料-环氧/聚酯混合型粉末涂料-常州市艾森塑料科技有限公司 Changzhou Asun Powder Coating Technology co.,Itd.

中文名称:N/A
英文名称:N/A
CAS No.:N/A
MDL No.:N/A
分子式:N/A
环氧/聚酯混合型粉末涂料 一 般 介 绍:采用环氧树脂和聚脂树脂为主要原材料制备而成,同时具备两者各自的独特性能,使得生 产出的涂料膜具有极佳的装饰性,机械性能和较强的耐腐蚀性,广泛应用于各种室内金属制品的涂装。 产 品 系 列:可提供标准型和低温固化型粉末涂料产品。可做成高光(80%以上)半光(50-80%)平光(20-50%)无光(20%以下)的产品(可根据 用户的需求控制光泽)。 无缝钢管 粉末物理性能:比重(g/cm3,25℃)1.4-1.7粒度分布:100%小于100微米(可根据涂装的特殊要求进行调整)。 固 化 条 件:标准型 180℃(工作温度)15分钟 低温固化 160℃(工作温度)15分 平均覆盖率:9-12平方米/公斤,膜厚60微米(以100%的粉末涂料使用率计算)。 Epoxy /polyester powder coatings(环氧/聚酯混合型粉末涂料)General introduction This type of powder coating is prepared from the epoxy and polyester resin.It has the merits of the two coatings,which makes the filmspreapared from this type of coating more decorative and gives it good mechanical properties and anti-corrosive properly.It is widely applied in the coating for indoor metallic appliances.Product Series Standard and low temperature solidification type powder coating can be provided.Products of different gloss are available,namely,high gloss(above 80%)semi gloss(50-80%)flat gloss(20-50%)and no gloss(below 20%)The gloss can be adjusted according to the customers'to the demand.Physical properties of the powder Density(g/cm3,25℃)1.4-1.7 Granularity distribution:100%below 100μm(it can be adapted to the customers'demand)Curing Condition Standard type 180℃(workpiece temperature)15minutes low temp curing type 160℃(workpiece temperature)15minutes Average coating rate 9-12㎡/kg,film thickness:60μm(calculated according to 100% consuming of powder coating)Coating performance 上一篇:没有了! 下一篇:没有了!
企业概况

可能为个人网站/或尚未进行注册。

信息来源网站

Changzhou Asun Powder Coating Technology co.,Itd.

网站性质 :未知
收录产品 :0
IP地址 :43.224.154.148
网站备案 :-
备案日期 :-
备案企业 :-
网站介绍 : Established in December 2010, Changzhou Asun Powder Coating Technology co.,Itd is located in Wujin Hi-tech Industrial Development zone and a specialized manufacturer integrating researching and developing,producing,marketing and services. Adhering to"Human oriented,Technology innovation" concept.we have set up scientific and technological incubation bases with technical support from Wuhan University of Technology,a keyuniversity affiliated to the Ministry of Education.Since 2016,we have carried out technical cooperation with Jiangnan institure of Graphene.introducing cutting-edge scientific.achievements,advanced production process and test instruments.we have formed our R&D team with experts in polumer materials which consist of post-doctoral research station. Specialized in the research and development of ultra-high performance Graphene powder coating with explosion-proof and anticorrosion funcitions.the producst fill domestic and aborad gaps in the field of civil and militare mix.With the guideline of"Honor,Responsibility,love".we are committed to provide opportunities for employees and benefitbur customers.our company as well as the society.Besides,we believe our perfect products and one-stop service will make a good image of this brand and our company. Our manufacturing technology has been certified by ISO9001 and ISO14000,Adopting "6 Sigma".a humanized manufacturing management method,helped us build up 8 automatic production lines.Meanwhile,we have established a long business relationship with domestic and overseas rawmaterial suppliers.Now,our annual sales can reach 3000 tons and our products are widely applied.
Mr.sun

+8613901502010

+8613901502010

+860519-86488058

展开全部联系方式(1)